4/7/2024 0 Comments Light gun on hdtv![]() ![]() Note that the gun calibration must be done at the height the gun will be used at. Hold the gun at the approximate location you will be using it. The gun must be held vertically during this process otherwise it will fail. Recoil power is adjustable in the Aimtrak Utility (see below)Ĭalibration is only required once. This type of power supply is often available on Ebay. ![]() The pictures below show the cable connection and an example supply. We have tested this 3A supply from an Ebay vendor and it gives stronger recoil than some 4A supplies: The center pin of the connector is positive. If using two or more guns you will need one supply per gun. The power supply needs to have the following maximum specs:,ĭO NOT use a supply with a current capability of greater than 4 amps as the mechanism relies on the current-limiting feature on the supply to prevent overload. The recoil power is routed via the connecting cable and the power supply needs to have a connector with outer diameter of 5.5mm and inner of 2.1mm. Recoil guns are shipped without recoil power supply. Recoil Power Requirement (Guns with recoil option only)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |